Making a medieval stocks pillory is an enjoyable and rewarding woodworking project. It is the perfect way to showcase your craftsmanship and add a unique and interesting piece of décor to your home. The stocks pillory is a traditional form of punishment and restraint used in the Middle Ages. It consists of two pieces of wood held together by a central locking bar that can be adjusted to fit around the neck and wrists of the person being punished. In this guide, we will cover the materials and tools needed, as well as the steps to make a medieval stocks pillory. Let’s get started!
Materials and Tools
To make a medieval stocks pillory, you will need the following materials and tools:
– Wood: You will need two pieces of hardwood such as oak, walnut, or cherry that are large enough to fit the person’s neck and wrists. The wood should be at least 2 inches thick and cut into large rectangles.
– Locking bar: This will be used to hold the two pieces of wood together and can be made from a piece of metal or hardwood.
– Drills and drill bits: To make the holes for the locking bar and any other necessary fasteners.
– Screws and nails: To attach the locking bar and fasten the two pieces of wood together.
– Sandpaper: To smooth out the edges of the wood and prepare it for finishing.
– Wood stain or paint: To give your finished stocks pillory a nice, polished look.
1. Cut the wood: Use a saw to cut two pieces of hardwood into large rectangles. Make sure the rectangles are large enough to fit the person’s neck and wrists.
2. Drill holes: Use a drill and drill bits to make two holes in each piece of wood. The holes should be big enough to fit the locking bar and any other necessary fasteners.
3. Attach the locking bar: Place the locking bar between the two pieces of wood and secure with screws or nails.
4. Smooth the edges: Use sandpaper to smooth the edges of the wood and prepare it for finishing.
5. Finish the stocks pillory: Use wood stain or paint to give your finished stocks pillory a nice, polished look.
Making a medieval stocks pillory is an enjoyable and rewarding woodworking project. With the right materials and tools, as well as this guide, you can create a unique and historically accurate piece of décor for your home. Good luck and have fun!
1. Start by making the base of the pillory. Cut two pieces of wood to the desired size and shape. Join them together with dowels, glue, and screws.
2. Make the two side pieces of the pillory. Cut two pieces of wood to the desired size and shape. Join them together with dowels, glue, and screws.
3. Cut two small pieces of wood that will form the neck and arm rests. Drill holes in the sides of the pillory and insert these pieces. Secure them with screws and glue.
4. Cut two pieces of wood to form the stocks. Drill holes in the sides of the pillory and insert them. Secure them with screws and glue.
5. Make the top piece of the pillory. Cut two pieces of wood to the desired size and shape. Join them together with dowels, glue, and screws.
6. Sand down the entire pillory to make it smooth.
7. Stain or paint the pillory as desired.
8. Enjoy your newly made medieval stocks pillory!
Understanding the Difference Between Stock and Pillory – A Guide
Stock and pillory are two similar, but distinct, forms of punishment used in medieval times and beyond. The main difference between stock and pillory is the manner in which they are used to punish offenders. Stocks were used to punish minor offenses, while a pillory was reserved for more serious offenses.
Stocks were typically used to punish minor offenses, such as public drunkenness and disorderly conduct. The offender would be placed in the stock and locked in place with hinged boards around their feet and hands. This would not only restrict movement, but also expose the offender to public humiliation.
Pillory, on the other hand, was a harsher form of punishment reserved for more serious offenses. The offender would be placed in the pillory, which is a wooden frame with holes for the arms and head. The offender would then be locked into place and exposed to public ridicule and humiliation. In some cases, people who were placed in the pillory might also be subjected to physical abuse.
Both stocks and pillory were designed to be a public humiliation and a deterrent to crime. And while both punishments could be very embarrassing and uncomfortable, they were not usually life threatening.
Answer: How Long Did People Spend in the Pillory? – An Overview
The pillory was a device used for public humiliation and punishment as far back as ancient Greece and Rome. It was used for centuries as a form of punishment for a variety of offenses. During its time, the pillory was used to punish people for minor offenses such as treason, blasphemy, and public drunkenness.
The length of time a person spent in the pillory depended on the severity of the crime they had committed. The punishment could range from a few hours to several days. In some cases, a person could be sentenced to stay in the pillory for weeks or even months. During this time, members of the public were allowed to jeer, heckle, and even throw things at the person in the pillory.
In the United States, the pillory was used until the early 1800s when it was abolished in most places. In some states, such as Virginia, it was still used into the mid-1800s. In the United Kingdom, the pillory was abolished in 1837.
What Materials Were Used to Make Medieval Stocks? – A Guide
The stocks were a common tool used to punish offenders in the Middle Ages. They were made from a variety of materials, including wood, iron and stone. The most common material used to construct stocks was wood, usually oak or beech. Iron was sometimes used for the more serious offenders, as it was more durable and less likely to break. Stone was used in some areas, but was not as common as the other two materials.
The stocks were typically constructed with two pieces of wood, one for each of the offender’s legs. The pieces were made to fit together and were held in place with metal or wooden clamps. The stocks were also sometimes decorated with carvings or symbols of justice, such as a lion or a scale.
In many cases, the stocks were not just used to punish offenders, but were also used as a form of public humiliation. People would gather around to watch the offender in the stocks, and would sometimes even mock or jeer at them. This form of punishment was eventually abolished in the 1700s when more humane forms of punishment were adopted.
Parts of a Pillory: A Guide to Understanding the Medieval Punishment Device
A pillory is a type of physical punishment device typically used during the medieval period. It consists of a wooden or metal frame with two holes for the head and hands, and a hinged board. The person being punished was placed in the frame and the board was lowered to secure them.
Parts of a Pillory:
1. Frame: The frame of the pillory is a rectangular or square shaped wooden or metal structure that stands upright. It has two holes at the top for the head and hands, and a hinged board at the bottom.
2. Head Hole: The head hole of the pillory is located at the top of the frame. It is wide enough to fit the head of the person being punished and has a lip on the inside to ensure that the head does not slip out.
3. Hand Hole: The hand hole is located at the top of the frame, below the head hole. It is wide enough to fit both hands of the person being punished and has a lip on the inside to ensure that the hands do not slip out.
4. Hinged Board: The hinged board is located at the bottom of the frame. It is used to secure the person in the frame by being lowered down and locked into place.
5. Lock: The lock is used to secure the hinged board in place. It is typically a padlock or other type of lock that is inserted into a hole in the hinged board.
This guide provides a comprehensive overview of the steps needed to make a medieval stocks pillory. The instructions are clear and easy to follow, and the illustrations help to provide further information on the construction process. With the right tools and materials, anyone can make a stocks pillory with this guide. It is recommended that great care is taken when working with tools to ensure safety.
1. Start by cutting four pieces of 4×4 lumber to the desired length for the sides of the pillory.
2. Cut two pieces of 2×4 lumber to the desired length for the top and bottom of the pillory.
3. Assemble the pieces together using wood screws and wood glue.
4. Cut two pieces of 1×4 lumber to the desired length for the neck brace and arm rest.
5. Attach the neck brace and arm rest to the sides of the pillory with wood screws and wood glue.
6. Cut two pieces of 2×2 lumber to the desired length for the pegs.
7. Drill holes into the sides of the pillory and attach the pegs with wood screws.
8. Sand the entire pillory to make it smooth and splinter free.
9. Stain and seal the pillory with a protective finish.