How to make a vertical corner planter

A vertical corner planter is a great way to add a touch of beauty and nature to your indoor or outdoor living space. By utilizing an unused corner, you can create a unique space to grow your favorite plants and flowers. With a few basic woodworking tools, you can create a beautiful vertical corner planter that is both functional and aesthetically pleasing.

Tools and Materials
-Circular saw
-Table saw
-Miter saw
-Drill bits
-Wood glue
-Wood (2x4s, 2x6s, 1x4s, plywood, etc.)

Step 1: Measure and Mark
Measure the corner of the room where you will place the vertical corner planter. Mark the measurements on a piece of paper. This will be used to determine the size and shape of the planter.

Step 2: Cut the Wood
Using the measurements from step 1, cut the pieces of wood that will make up the frame of the planter. Be sure to make the cuts as straight as possible. You can use a miter saw, circular saw, or table saw to make the cuts.

Step 3: Assemble the Frame
Using wood glue and screws, assemble the frame of the planter. Clamps can be used to keep the pieces in place while the glue dries.

Step 4: Add the Shelves
Cut pieces of plywood to fit the frame of the planter. These will be used as shelves to hold the plants. Attach the shelves to the frame using wood glue and screws.

Step 5: Finish the Planter
Sand down any rough edges on the frame and shelves. Stain or paint the planter if desired.

Creating a vertical corner planter is a great way to add beauty and a touch of nature to your home. With the right tools and materials, you can create a unique and attractive planter that is both functional and aesthetically pleasing.
1. Gather the materials needed to make a vertical corner planter – plywood, screws, drill, hinges, finish nails, and a jigsaw.

2. Cut the plywood into two pieces. The first piece should be the size of the desired planter, and the second piece should be slightly larger than the first.

3. Mark out the location of the hinges on the larger piece of plywood.

4. Drill the holes for the hinges.

5. Attach the hinges to the larger piece of plywood.

6. Cut the front of the planter with a jigsaw.

7. Attach the smaller piece of plywood to the larger piece with screws.

8. Drill holes in the smaller piece of plywood for drainage.

9. Line the bottom of the planter with finish nails to prevent water from leaking out.

10. Fill the planter with potting soil and plants.

DIY Tutorial: How to Make a Vertical Planter Tower out of PVC Pipe

This DIY tutorial is an easy and cost-effective way to add a vertical planter to your garden. It requires basic tools and materials such as PVC pipe, drill, screws, and soil. The pipe is cut into four equal lengths and the ends are sealed with end caps. Holes are drilled into the sides of the pipe and then screws are used to attach the pipes together. The pipes are then lined with a plastic liner and filled with soil. Finally, plants are placed in the soil and watered regularly. This project takes about an hour to complete and is a great way to add a vertical element to your garden.

Congratulations! You have created a beautiful vertical corner planter. Not only is it a great home decor piece, but it is also a great way to add more plants to your living space. With the right care and attention, your vertical corner planter will last for years to come. We recommend that you regularly check your plants and the soil for signs of over or under watering, and make sure to feed them with a suitable fertilizer. Additionally, make sure to place the planter in a spot where it will get enough sunlight and be sure to rotate the plants so that they get even exposure. Finally, don’t forget to enjoy your new vertical corner planter!
1. Gather the necessary materials, such as wood, screws, screws, nails, and a drill.

2. Cut the wood into the desired size and shape for the planter.

3. Drill pilot holes in the wood pieces, and attach them together with screws or nails.

4. Use a chisel to shape the wood and create the corner design.

5. Sand down the wood to create a smooth finish.

6. Stain or paint the wood to give it a finished look.

7. Add a waterproof sealant to protect the wood from weather damage.

8. Place the planter in the desired location and fill it with soil, plants, and other decorations.