How to avoid a kickback

Kickbacks are one of the most dangerous hazards in woodworking. They can cause serious injury, and sometimes even death. Fortunately, there are a few simple steps you can take to minimize your risk of kickbacks and keep yourself safe.

1. Always Use the Right Tools

The most important part of avoiding a kickback is to make sure you are using the right tools for the job. The wrong saw blade or router bit can cause the wood to bind and kickback. Make sure you have the correct blade or bit for the job and that it is sharp and in good condition.

2. Make Sure the Work Piece is Secure

Another important step is to make sure the work piece is secure before you begin. If the work piece is not firmly clamped or held in place, it can move around and cause the blade or bit to bind and kickback. Make sure that the work piece is secured before you begin cutting or routing.

3. Use Push Sticks

Whenever possible, use push sticks to help guide the work piece through the cut. Push sticks help keep your hands away from the blade or bit, minimizing the risk of kickback.

4. Don’t Force the Cut

If you find that the cut is not going smoothly, don’t try to force it. This can cause the blade or bit to bind and kickback. Instead, stop and check to see if the blade or bit is dull or if the work piece is not properly secured.


Kickbacks can be dangerous, but with the right tools and techniques, you can minimize your risk. Make sure you have the right tools, secure the work piece, use push sticks, and don’t force the cut. Following these steps will help keep you safe and avoid kickbacks.
1. Install a splitter or riving knife behind the saw blade. This will help to prevent the kerf from closing in and pinching the saw blade.

2. Make sure the saw blade is sharp and properly aligned. A dull or misaligned blade will cause the wood to bind and kickback.

3. Use a push stick or other pushing tool to guide the workpiece. This will help to keep your hands away from the saw blade and reduce the risk of kickback.

4. Adjust the blade height so that it is slightly lower than the thickness of the material being cut. This will help to reduce friction and reduce the chance of kickback.

5. Make sure the fence is parallel to the blade and that it is set to the correct distance from the blade.

6. Feed the workpiece slowly and steadily. Don’t try to force it through the saw.

7. Avoid cutting small pieces of wood. The smaller the piece, the higher the risk of kickback.

8. Wear proper safety equipment. Safety glasses, hearing protection, and a dust mask are all recommended when working with power tools.

How to Prevent Kickback: Understanding the Definition and Solutions

Kickback is a term used to describe a type of bribery or unethical payment made in return for a favor, such as awarding a contract or business opportunity. It is a serious crime that can have serious consequences for both the giver and the receiver.

To prevent kickbacks, organizations should develop clear policies that outline what constitutes a kickback and the consequences for those who engage in kickback activities. Organizations should also provide guidance and education to employees on how to identify potential kickback situations and how to report any instances of suspected kickback activity.

Organizations should also have procedures in place to monitor and audit employee activities to ensure that kickbacks are not occurring and that employees are adhering to company policies. In addition, organizations should have a system of checks and balances in place to ensure that vendors and contractors are not submitting false invoices or providing false information in order to receive kickbacks.

It is also important for organizations to have a code of ethics in place that outlines the consequences of engaging in kickback activities and encourages employees to report any suspected kickback activity. Finally, organizations should consider implementing an anonymous reporting system so that employees can report any suspected kickback activity without fear of retaliation.

The Most Common Causes of Kickback – A Comprehensive Guide

Kickback is a term used to describe a type of illegal activity that occurs when a person or company pays someone else in order to receive a benefit or advantage. Kickbacks can take many forms, including bribes, gifts, favors, or other payments. Kickbacks can be illegal under both federal and state laws, and penalties for engaging in kickback schemes can be severe.

The most common causes of kickback include:

1. Bidding Fraud: Bidding fraud occurs when a company pays someone to influence the outcome of a bidding process. This can include awarding a contract to a certain bidder, or providing them with preferential treatment.

2. Pay-to-Play: Pay-to-play schemes involve a company offering a job or a contract in exchange for a payment. This type of kickback is illegal in many states.

3. Referral Fees: Referral fees involve paying someone for referring a customer or client to a company. This type of kickback is illegal in many states.

4. Conflict of Interest: Conflict of interest kickbacks occur when a company offers a job or a contract to someone with whom they have a personal or financial relationship. This type of kickback is illegal in many states.

5. Kickbacks for Services: Kickbacks for services involve a company paying someone a fee or commission in exchange for the referral of a customer or client. This type of kickback is illegal in many states.

6. Kickbacks for Products: Kickbacks for products involve a company paying someone a fee or commission in exchange for the sale of a product. This type of kickback is illegal in many states.

7. Kickbacks for Purchases: Kickbacks for purchases involve a company paying someone a fee or commission in exchange for the purchase of a product or service. This type of kickback is illegal in many states.

Stop Kickback on a Circular Saw – Tips and Techniques

1. Use a sharp blade: Using a sharp blade will help to reduce kickback. When the blade becomes dull, it can cause the saw to bind and kickback.

2. Use the right blade for the job: Different blades are designed for different types of materials. Using the wrong blade can increase the chances of kickback.

3. Choose a slow speed: High-speed blades can cause kickback if the material is not cut correctly.

4. Hold the saw firmly: Make sure the saw is firmly held when cutting to reduce the risk of kickback.

5. Keep the blade guard on: The blade guard is designed to protect you from kickback and should be used at all times.

6. Avoid kickback prone cuts: Be aware of cuts that can cause kickback, such as crosscutting and ripping.

7. Use a splitter or riving knife: These devices help to prevent kickback by keeping the material from binding on the back of the blade.

8. Use a featherboard: A featherboard helps to keep the material flat against the table and reduces the chance of kickback.

9. Make sure the material is properly secured: Make sure the material is securely clamped or screwed down before cutting to reduce kickback.

This guide was very informative and provided helpful tips on how to prevent kickbacks. The best way to avoid a kickback is to always practice ethical behavior and remain informed about the laws and regulations in your area. Additionally, it is important to be aware of potential areas of risk, such as bribery and other forms of improper inducement. Finally, it is helpful to have clear policies and procedures in place to ensure that all parties involved are aware of the rules and expectations. Overall, this guide provides a great starting point for anyone looking to prevent kickbacks.
1. Always use a sharp blade. A dull blade will cause a kickback as the wood is cut, sending it back towards the user.

2. Make sure the saw is set properly. The depth of the blade should be no more than 1/8-inch deeper than the material being cut.

3. Keep hands and fingers away from the blade. The hands should be kept well away from the blade, and a push stick should be used when cutting narrow pieces.

4. Make sure the wood is firmly held down. If the wood is not securely clamped to the work surface, it is likely to move and cause a kickback.

5. Maintain a steady speed. Cutting too slowly can cause the blade to bind, creating a kickback.